top of page

Bio‑aerosol Hooded Coverall

Hooded bio-aerosol coverall in SMS nonwoven with enhanced filtration, elastic face opening, and taped seams. Designed for microbiological labs, pharma production, and aerosol-generating procedures.

This hooded bio-aerosol coverall is engineered for environments where infectious aerosols and fine particulate matter are present. The outer layer is SMS nonwoven weighing about 45 gsm with an electrostatically charged filter middle layer, capturing airborne bacteria and viral droplets on contact. The attached hood features an elasticated face opening that fits snugly around the respirator and face without compromising seal integrity. A full-length zipper is protected by a storm flap with hook-and-loop closure. Elasticated cuffs and ankles prevent gaps at the extremities. The fabric is breathable, reducing heat stress during extended wear. All seams are taped to block particle ingress through stitch holes. A reinforced back panel adds durability during long shifts. A raised waistband reduces cold air ingress at the lower back. Meets EN 14126, EN 13982 Type 5, and EN 13034 Type 6, and conforms to EN ISO 13688. Available in sizes S through 5XL in white. Single-use disposable garment.

Contact us
modelname
BA‑02‑01
BA‑02‑02
BA‑02‑03
Material
45gsm SMS non‑woven with electrostatic‑charged filter middle‑layer
45gsm SMS non‑woven with electrostatic‑charged filter middle‑layer
45gsm SMS non‑woven with electrostatic‑charged filter middle‑layer
Thickness
0.06 mm
0.07 mm
0.05 mm
Seam Type
Taped sealed seams
Taped sealed seams
Taped sealed seams
Closure
Full‑length Zipper + Hook‑Loop storm‑flap
Full‑length Zipper + Hook‑Loop storm‑flap
Full‑length Zipper + Hook‑Loop storm‑flap
Cuff
Elasticated snug‑fit cuffs
Elasticated snug‑fit cuffs
Elasticated snug‑fit cuffs
Ankle
Elasticated ankle cuffs
Elasticated ankle cuffs
Elasticated ankle cuffs
Hood
Attached elastic‑face‑opening hood fit respirator without breaking seal
Attached elastic‑face‑opening hood fit respirator without breaking seal
Attached elastic‑face‑opening hood fit respirator without breaking seal
Size Range
S‑5XL
S‑5XL
S‑5XL
Standard Compliance
EN14126,EN13982(Type5),EN13034(Type6),EN ISO13688
EN14126,EN13982(Type5),EN13034(Type6),EN ISO13688
EN14126,EN13982(Type5),EN13034(Type6),EN ISO13688
Color Options
White
Light‑blue
Blue
Package
1pc/poly‑bag,40bags/carton
1pc/poly‑bag,40bags/carton
1pc/poly‑bag,40bags/carton
Application
Microbiological‑lab & pharma‑production anti‑infective‑aerosol protection
Fine‑particulate‑hazard aerosol‑generating‑procedure working‑task
Bio‑hazard‑zone long‑shift operation heat‑stress‑reduction environment
Feature
Electrostatic‑charged SMS filter capture airborne bacteria‑viral‑droplets;taped seams block particle ingress;reinforced back‑panel enhance durability;raised waistband reduce cold‑air ingress at lower‑back;breathable fabric relieve heat‑stress;latex‑free low‑linting disposable
Elastic hood‑opening keep respirator‑seal integrity;hook‑loop storm‑flap fully cover zipper;inspect pin‑hole‑seam‑defect before‑donning;individually packed
Strict single‑use;discard bio‑hazard waste after contamination;no reuse or laundering
Care Instruction
Single‑use disposable;Discard as bio‑hazard waste;Do not wash / reuse
Single‑use disposable;Discard as bio‑hazard waste;Do not wash / reuse
Single‑use disposable;Discard as bio‑hazard waste;Do not wash / reuse
Shelf Life
5 years in cool,dry,dark storage avoid UV‑radiation
5 years in cool,dry,dark storage avoid UV‑radiation
5 years in cool,dry,dark storage avoid UV‑radiation
bottom of page