top of page

Blood Resistant Coverall

Full-body blood resistant coverall in PP+PE film laminate with taped seams and attached hood. Barrier against blood and body fluid penetration for high-exposure care.

This full-body blood resistant coverall provides comprehensive protection against blood, body fluids, and infective agents. The shell is PP+PE film laminate weighing about 60 gsm, which blocks liquid penetration and resists viral passage. All seams are ultrasonically welded and tape-sealed with 25 mm tape to eliminate stitch-hole leakage. A two-way front zipper is covered by a storm flap with adhesive closure. Elasticated hood opening, cuffs, and ankles seal the garment at the extremities. The attached hood fits under a face shield or respirator. Reinforced knee and shoulder panels extend service life. A back elastic waist improves fit under heavy layers. The coverall is suitable for emergency response, trauma care, and autopsy work. Meets EN 13795, EN 14126, EN 13034 Type 6, and EN ISO 13688. Comparable to AAMI PB70 Level 3 barrier and ASTM F1670 or F1671 penetration tests. Available in sizes S through 5XL. Single-use; discard after use as regulated medical waste.

Contact us
modelname
BRS‑01‑01
BRS‑01‑02
BRS‑01‑03
Material
60gsm PP+PE film laminate
60gsm PP+PE film laminate
60gsm PP+PE film laminate
Thickness
0.07 mm
0.08 mm
0.06 mm
Seam Type
Ultrasonically welded +25mm tape‑sealed leak‑proof seams
Ultrasonically welded +25mm tape‑sealed leak‑proof seams
Ultrasonically welded +25mm tape‑sealed leak‑proof seams
Closure
Two‑way front zipper with adhesive storm‑flap;back elastic waist
Two‑way front zipper with adhesive storm‑flap;back elastic waist
Two‑way front zipper with adhesive storm‑flap;back elastic waist
Cuff
Elasticated snug‑fit cuffs
Elasticated snug‑fit cuffs
Elasticated snug‑fit cuffs
Ankle
Elasticated ankle cuffs
Elasticated ankle cuffs
Elasticated ankle cuffs
Hood
Attached hood with elastic‑face‑opening compatible with face‑shield‑respirator
Attached hood with elastic‑face‑opening compatible with face‑shield‑respirator
Attached hood with elastic‑face‑opening compatible with face‑shield‑respirator
Size Range
S‑5XL
S‑5XL
S‑5XL
Standard Compliance
EN13795,EN14126,EN13034 Type6,EN ISO13688,AAMI PB70 Level3,ASTM F1670,ASTM F1671
EN13795,EN14126,EN13034 Type6,EN ISO13688,AAMI PB70 Level3,ASTM F1670,ASTM F1671
EN13795,EN14126,EN13034 Type6,EN ISO13688,AAMI PB70 Level3,ASTM F1670,ASTM F1671
Color Options
White
Light‑blue
Blue
Package
1pc/bag,50bags/carton
1pc/bag,50bags/carton
1pc/bag,50bags/carton
Application
Emergency‑response‑trauma‑care‑autopsy full‑body blood‑body‑fluid‑virus‑barrier protection
High‑exposure‑clinical‑scene personnel‑isolation working‑task
Infective‑agent‑contamination‑zone splash‑penetration‑resistant operating‑environment
Feature
60gsm PP+PE laminate block liquid‑viral penetration;tape‑sealed seams eliminate stitch‑hole leakage;two‑way zipper adhesive storm‑flap;elastic hood‑cuff‑ankle sealing;reinforced shoulder‑knee panels;back elastic waist fit heavy under‑layers;disposable single‑use
Inspect seam‑tape‑film integrity before donning;no‑reuse;dispose as regulated medical‑waste;avoid sharp‑object puncture
Comparable AAMI PB70 Level3 barrier performance
Care Instruction
Single‑use disposable;Discard as regulated medical waste;Do not wash / reuse
Single‑use disposable;Discard as regulated medical waste;Do not wash / reuse
Single‑use disposable;Discard as regulated medical waste;Do not wash / reuse
Shelf Life
5 years in cool,dry dust‑free clean‑storage
5 years in cool,dry dust‑free clean‑storage
5 years in cool,dry dust‑free clean‑storage
bottom of page