top of page

Virus Resistant Hood

Disposable virus resistant hood in microporous nonwoven with elastic face and neck opening. Covers head and hair during patient care and viral testing procedures.

This disposable virus resistant hood covers the entire head, hair, and neck to prevent contamination by viral droplets and aerosols. Constructed from microporous nonwoven weighing about 45 gsm with a viral barrier treatment, the material blocks viral penetration while allowing limited breathability. An elasticated face opening seals around the forehead and cheeks without interfering with goggles or respirators. The back neck edge is elasticated to fit snugly. The hood is lightweight and can be worn under a coverall hood or face shield. Bound edges prevent fraying. A pack contains 100 pieces. Flat-lock seams minimize particle shedding. A rear drawstring allows fit adjustment for different head sizes. Meets EN 14126 and EN 13795, and conforms to EN ISO 13688. Comparable to AAMI PB70 Level 1. One size fits most. Single-use; discard after use as medical waste. Do not reuse or launder. Store in a cool, dry place. Suitable for isolation wards, dental clinics, and mobile testing sites.

Contact us
modelname
VR‑06‑01
VR‑06‑02
VR‑06‑03
Material
45gsm viral‑barrier‑treated microporous non‑woven fabric
45gsm viral‑barrier‑treated microporous non‑woven fabric
45gsm viral‑barrier‑treated microporous non‑woven fabric
Thickness
0.06 mm
0.07 mm
0.05 mm
Seam Type
Flat‑lock low‑particle‑shedding seams;bound anti‑fray edges
Flat‑lock low‑particle‑shedding seams;bound anti‑fray edges
Flat‑lock low‑particle‑shedding seams;bound anti‑fray edges
Closure
Elastic face‑opening;rear draw‑string head‑size adjustment;elastic neck edge
Elastic face‑opening;rear draw‑string head‑size adjustment;elastic neck edge
Elastic face‑opening;rear draw‑string head‑size adjustment;elastic neck edge
Cuff
N/A
N/A
N/A
Ankle
N/A
N/A
N/A
Hood
Stand‑alone disposable hood for full head‑hair‑neck coverage
Stand‑alone disposable hood for full head‑hair‑neck coverage
Stand‑alone disposable hood for full head‑hair‑neck coverage
Size Range
S‑5XL
S‑5XL
S‑5XL
Standard Compliance
EN14126,EN13795,EN ISO13688;ref AAMI PB70 Level1
EN14126,EN13795,EN ISO13688;ref AAMI PB70 Level1
EN14126,EN13795,EN ISO13688;ref AAMI PB70 Level1
Color Options
White
Light‑blue
Blue
Package
1pc/bag,100bags/carton
1pc/bag,100bags/carton
1pc/bag,100bags/carton
Application
Patient‑care procedure head‑hair‑neck anti‑viral‑droplet‑aerosol containment protection
Mobile‑viral‑testing‑site working‑task
Isolation‑ward auxiliary‑head‑contamination‑barrier environment
Feature
Viral‑barrier‑treated microporous non‑woven block virus‑droplet;elastic face‑opening compatible with goggles‑respirator without seal‑interfere;rear draw‑string adapt various head‑circumference;flat‑lock seams reduce particle‑shedding;light‑weight can wear under coverall‑hood or hair‑net;latex‑free disposable
Inspect fabric tear‑defect before‑donning;single‑use;discard medical‑waste after‑usage;do‑not‑launder
Only auxiliary‑head‑protection;must match full‑body protective garment for complete virus‑barrier
Care Instruction
Single‑use disposable;Discard as medical waste;Do not wash / reuse
Single‑use disposable;Discard as medical waste;Do not wash / reuse
Single‑use disposable;Discard as medical waste;Do not wash / reuse
Shelf Life
5 years in cool,dry,dark storage
5 years in cool,dry,dark storage
5 years in cool,dry,dark storage
bottom of page