top of page

Virus Resistant Hooded Coverall

Hooded virus resistant coverall in microporous film laminate with elastic face opening and sealed seams. For medical isolation, sample collection, and viral testing environments.

This hooded virus resistant coverall offers full-body protection against viral droplets, airborne infective agents, and liquid splashes. The microporous film laminate shell weighs about 55 gsm and blocks viral penetration while allowing limited breathability. The integrated hood features an elasticated face opening that seals around the respirator or face shield. A front zipper is protected by a storm flap. Taped seams prevent leakage through stitch lines. Elasticated cuffs and ankle cuffs close the garment at the extremities. A reinforced back panel adds durability during long shifts. The coverall is suitable for single-use in isolation wards, mobile testing units, and autopsy rooms. Meets EN 14126, EN 13795, EN 13982 Type 5, EN 13034 Type 6, and EN ISO 13688. Comparable to ASTM F1671 viral penetration testing. Available in sizes S through 5XL in white. Inspect the sterile pouch before opening. Discard after use according to medical waste regulations.

Contact us
modelname
VR‑02‑01
VR‑02‑02
VR‑02‑03
Material
55gsm microporous film laminate
55gsm microporous film laminate
55gsm microporous film laminate
Thickness
0.07 mm
0.08 mm
0.06 mm
Seam Type
Tape‑sealed leak‑proof seams
Tape‑sealed leak‑proof seams
Tape‑sealed leak‑proof seams
Closure
Full‑length Zipper + Hook‑Loop storm‑flap
Full‑length Zipper + Hook‑Loop storm‑flap
Full‑length Zipper + Hook‑Loop storm‑flap
Cuff
Elasticated snug‑fit cuffs
Elasticated snug‑fit cuffs
Elasticated snug‑fit cuffs
Ankle
Elasticated ankle cuffs
Elasticated ankle cuffs
Elasticated ankle cuffs
Hood
Attached elastic‑face‑opening hood seal around respirator / face‑shield
Attached elastic‑face‑opening hood seal around respirator / face‑shield
Attached elastic‑face‑opening hood seal around respirator / face‑shield
Size Range
S‑5XL
S‑5XL
S‑5XL
Standard Compliance
EN14126,EN13795,EN13982(Type5),EN13034(Type6),EN ISO13688;ref ASTM F1671
EN14126,EN13795,EN13982(Type5),EN13034(Type6),EN ISO13688;ref ASTM F1671
EN14126,EN13795,EN13982(Type5),EN13034(Type6),EN ISO13688;ref ASTM F1671
Color Options
White
Light‑blue
Blue
Package
1pc/poly‑bag,40bags/carton
1pc/poly‑bag,40bags/carton
1pc/poly‑bag,40bags/carton
Application
Medical‑isolation‑ward anti‑viral‑droplet‑aerosol full‑body protection
Mobile‑viral‑sample‑collection working‑task
Autopsy‑room infective‑virus‑exposure operating‑environment
Feature
55gsm microporous laminate resist viral‑penetration with partial breathability;elastic hood‑opening keep respirator sealing integrity;tape‑sealed seams block stitch‑line leakage;reinforced back‑panel improve long‑shift durability;latex‑free low‑linting disposable;inspect pouch & fabric defect before opening
Single‑use requirement;discard regulated medical waste after contamination;no reuse or laundering
Individually packed;check pin‑hole,tear,seam defect prior to donning
Care Instruction
Single‑use disposable;Discard as regulated medical waste;Do not wash / reuse
Single‑use disposable;Discard as regulated medical waste;Do not wash / reuse
Single‑use disposable;Discard as regulated medical waste;Do not wash / reuse
Shelf Life
5 years in cool,dry,dark storage avoid sunlight
5 years in cool,dry,dark storage avoid sunlight
5 years in cool,dry,dark storage avoid sunlight
bottom of page